3D Tech Works
Custom Benchtop CNC Machines and Supplies
Technology for a 3D World 

     We do not currently have our online store up and running.        Meantime, please use the contact form or call or Email to order
Note:  Prices subject to change without notice.  Prices subject to fluctuation in US/CDN dollar conversion.  Prices do not include taxes or shipping and handling.  Items may not be exactly as shown, we reserve the right to substitute equivalent items of equal or greater value.  Quantity pricing may be available, please contact us for quotation.

Electrical Parts and Accessories 
Power Supply, 24V 14.6A  
120v/240v input, fan cooled


                                                                               $80.00CDN

E-Stop kit  
Palm button, box, strain reliefs,  This is a DIY kit that you assemble yourself.  Comes with 2m of 2 cond wire.

Kills your system in case of an emergency.    

                                                                                   $40.00 CDN                                                                         
Micro Limit Switch Kit   Kit Includes: 
6 Micro Limit Switches 
6 Limit Switch Plates 
12 M3 10mm Long Mounting Cap Screws 
6 M5 8mm Low Profile Screws  
6 Drop In Tee Nuts                   
Note: M3 tap required for tapping switch holes.
3M x 2cond wire                                      $50.00 CDN                               

Electronic Proximity Sensor Homing Switch Kit
Kit Includes:

3 electronic proximity homing switches w/led
3 sets mounting hardware
3 sets target hardware
3 diodes
power supply + connector
                                  Parts Kit Only            $75.00 CDN
      Installed with Machine Purchase          $125.00 CDN
Electronics Package Level 1 - pre-programmed Arduino Nano  board, screw terminal shield,  stepper drivers, USB cable.  Wiring not included.  
Level 2 Kit includes above plus pre drilled mounting panel, power supply, dust cover, mtg hardware, 10' power cord and fuses.
Level 3 kit includes all above plus 1m 15x40 cable chain, 1/2m 15x20 cable chain, mounting hardware, motor wire and terminal blocks, LED and E-stop wiring, E-stop switch

3 stepper drivers for the CBM, 4 for OX and others.
Level 1 Kit with 3 x Stepper Driver                $150.00 CDN
Level 2 Kit with 3 x Stepper Driver                $300.00 CDN 
Level 3 Kit with 3 x Stepper drivers               $415.00 CDN

Add $35.00 to any of above for fourth stepper driver

CNC XPro USB Controller
4 axis cnc controller

http://www.spark-concepts.com/cnc-xpro-controller-v2/
                                        
                                                                       $Call CDN   

CNC USB controller Mk3/4 (4 axis)
Note:  This controller is NOT GRBL compatible
and requires external stepper motor drivers
http://www.planet-cnc.com/files/CNCUSBControllerMk34.pdf
                                                               $Call CDN

Stepper Motor Driver Module
Single Axis motor controller with step, dir inputs, 10-35V input  TB6650, Over Temp limit, current limit to 3.5A, full, half, 1/8, 1/16 step, Built in heatsink, easy wiring with screw terminal blocks
(may not be exactly as shown)
                                                                        $35.00 CDN   

NEMA 23 Stepper Motor 
Standard torque motor 56mm, 175 oz/in, 2.8A peak current/phase
200 step/rev, 4-wire, 24" leads
                                    
                                                                      $40.00 CDN   

NEMA 23 Stepper Motor 
Midrange torque motor, 76mm, 269 oz/in, 2.8A peak current/phase
200 step/rev, 4-wire, 24" leads
                                    
                                                                      $50.00 CDN   

NEMA 23 High Torque Stepper Motor 
Hi torque motor 84mm, 345 oz/in, 3.0A peak current/phase
200 step/rev, 4-wire, 24" leads
                                    
                                                                  $60.00 CDN   

10mm x 15mm inside Cable Chain
1000mm length
                                                                       $25.00 CDN
  

15mm x 30mm inside Cable Chain
1000mm length
                                                                      $35.00 CDN   

15mm x 40mm inside Cable Chain
1000mm length
                                                                      $40.00 CDN   

Z Axis Touch Plate with connectors

Parts Only                                                      $35.00 CDN
Installed with Machine Purchase                    $65.00 CDN  

LED Light Ring

Mounts under your Router Mount to give lots of light to the work surface.  12LED's, screw terminal electrical connection.   Runs on 24V

LED Light Ring                                                $19.95 CDN

Tripp Lite Power Filter / Surege Suppressor

Extreme protection for your sensitive electronics.  Filter out noise from router and other electrical sources to prevent interference with your machine operation.  Also traps surges to protect your expensive investment.

Tripp Lite 4 outlet Filter                                   $80.00 CDN

Routers, Bits and Accessories 
Bosch Colt PR20E Palm Router
Variable speed, soft start, 1HP motor, 5.8A, 15000 - 35000 RPM, with base.

                                                                 $199.00 CDN

Dewalt DWP611 Palm Router
Variable speed, soft start, 1.25HP motor, 7A, LED lights, 15000 - 35000 RPM, with base.

                                                               $220.00 CDN

Dust Shoe attachment
Clear Acrylic, multi size hose attachment, 1.75" brush.  Adjustable height, thumbscrews

                                                            $125.00  CDN

Router mount 71mm (fits Bosch directly, fits Dewalt 611 + others with shims)
includes 4 mounting brackets, 8 x M5x10mm screws,
4 x M5 tee nuts

                                                                $55.00 CDN

Single Flute 3.175 x 3.175 x 22mm length
Solid Carbide Up Cut Spiral Cutter

                                        $5.00 ea, 5 for $20.00  CDN
Two Flute 3.175 x 3.175 x 22mm length
Solid Carbide Up Cut Spiral Cutter

                                         $5.00 ea, 5 for $20.00  CDN
Two Flute 3.175 x 3.175 x 22mm length
Solid Carbide Ball Nose Spiral Cutter 
used for engraving and carving

                                         $5.00 ea, 5 for $20.00  CDN
6.35mm x 3.175mm chuck collet adapter
 (1/4" x 1/8")  Pack of 2

                                                               $20.00  CDN
Two Flute 1/4" V-groove Engraving bit
1/4" shank, 60 degree Carbide cutters

                                                               $17.00  CDN
Two Flute 3/8" V-groove Engraving bit
1/4" shank, 90 degree Carbide cutters

                                                                $18.00  CDN
Two Flute 1/2" V-groove Engraving bit
1/4" shank, 90 degree Carbide cutters

                                                               $19.00  CDN
M5 x 0.8 mm tap

                                                               $6.00 CDN
M3 x 0.5 mm tap

                                                               $5.00 CDN